You are configuring Policy Based Routing (PBR) for a subnet that will be used to test a new default route for
your network Traffic originating from 10.2.250.0/24 should use a new default route to 10.1.1.253. Other
non-default routes for this subnet should not be affected by this change.
What are two parts of the solution for these requirements? (Select two.)
Your customer has an Aruba CX 6200F VSF stack with two switches. A third member (JL726A) needs to be
added to the VSF configuration. What e the configuration that enables the new devices to join the VSF?
A customer wants to enable wired authentication across all their CX switches One of the requirements is that
the switch must be able to authenticate a single computer connected through a VoIP phone.
Which feature should be enabled to support this requirement?
has multiple VRFs. You need to find the IP address of a particular client device with a known MAC address
You run the "show arp" command on the primary switch in the pair but do not find a matching entry for the
client MAC address.
The client device is connected to an Aruba CX 6100 switch by VSX LAG.
Which action can be used to find the IP address successfully?
You are troubleshooting an issue with a 10 102.39 0/24 subnet which is also VLAN 1000 used Tor wireless
clients on a pair of Aruba CX 8360 switches The subnet SVI is configured on the 8360 pair, and the DHCP
server is a Microsoft Windows Server 2022 Standard with an IP address of 10 200 1.100. The 10.102.250.0/24
subnet is used for switch management.
A large number of DHCP requests are failing You are observing sporadic DHCP behavior across clients
attached to the CX 6100 switch.
Which action may help fix the issue?
© Copyrights DumpsEngine 2025. All Rights Reserved
We use cookies to ensure your best experience. So we hope you are happy to receive all cookies on the DumpsEngine.