Free NFPA CWBSP Exam Questions
Absolute Free CWBSP Exam Practice for Comprehensive Preparation
-
NFPA CWBSP Exam Questions
-
Provided By: NFPA
- Exam: Certified Water-Based Systems Professional
- Certification: NFPA Certification
-
Total Questions: 100
-
Updated On: Feb 18, 2025
-
Rated: 4.9 |
-
Online Users: 200
-
Question 1
-
What is the maximum percentage a fire pump's rated pressure is permitted to produce at churn condition?
Answer: D
-
What is the maximum percentage a fire pump's rated pressure is permitted to produce at churn condition?
-
Question 2
-
A 4 in. (102 mm) nominal diameter Schedule 10 sprinkler main is to be supported from the structure utilizing a trapeze hanger with a span of 8 ft (2.4 m). Using Schedule 40 pipe for the trapeze hanger, what is the minimum diameter pipe that should be used?
Answer: B
-
A 4 in. (102 mm) nominal diameter Schedule 10 sprinkler main is to be supported from the structure utilizing a trapeze hanger with a span of 8 ft (2.4 m). Using Schedule 40 pipe for the trapeze hanger, what is the minimum diameter pipe that should be used?
-
Question 3
-
What is the maximum percentage a fire pump's rated pressure is permitted to produce at churn condition?
Answer: D
-
What is the maximum percentage a fire pump's rated pressure is permitted to produce at churn condition?
-
Question 4
-
What is the minimum calculated design area for a light hazard sprinkler system protecting an open office space with a noncombustible acoustic ceiling tile installed 6 in. (150 mm) below the bottom of solid wood joists?
Answer: B
-
What is the minimum calculated design area for a light hazard sprinkler system protecting an open office space with a noncombustible acoustic ceiling tile installed 6 in. (150 mm) below the bottom of solid wood joists?
-
Question 5
-
Annual testing for a 1,500 gpm (5,677 L/min) at 80 psi (1.4 bar) fire pump supporting an attached sprinkler system demand of 1,800 gpm (6,813 L/min) at 100 psi (6.9 bar) is being conducted. The flow test of the fire pump must achieve what minimum flow rate and discharge pressure?
Answer: C
-
Annual testing for a 1,500 gpm (5,677 L/min) at 80 psi (1.4 bar) fire pump supporting an attached sprinkler system demand of 1,800 gpm (6,813 L/min) at 100 psi (6.9 bar) is being conducted. The flow test of the fire pump must achieve what minimum flow rate and discharge pressure?